Three Central Guidelines for Maintaining Your Sand Filter Septic System

The sand filter systems are an ideal choice for your home if you have limited space on your property. In simple terms, this setup works like a standard septic design, but it is placed on limited land. Therefore, the effluent is not directed to a leach field. Instead, the fluid is allowed to drain through a sand bed back. If you are planning on installing this type of septic system on your property, you must understand the right maintenance practices. Proper upkeep will prolong the lifespan of your setup and ensure optimal performance. Here are the most critical guidelines for maintaining a sand filter septic system.

Pump Out the Holding Tank

The holding tank in your septic system structure must be pumped out on a regular basis. In general, this holding tank is responsible for collecting the sewage and wastewater from the household. When the material is accumulated, the bacteria in the tank break down or mineralise the waste, making it harmless. After this process, the liquid effluent can be drained out. However, the solids will settle at the bottom of the tank. If this material is allowed to build up, it will prevent the septic setup from functioning as expected. Pumping out the waste will ensure that the holding tank operates at optimal levels.

Check the Drain Lines

There are drain lines in your septic structure which are responsible for carrying liquid wastewater to the sand bed. Unfortunately, these lines are susceptible to waste build-up after prolonged use. The accumulation can be attributed to back pressure in the drainage lines and the presence of particles in the effluent. You should think about installing some filters in the channels to prevent particulate waste from building up. If the drainage pumps in your septic network are completely clogged, you should consult an expert for replacement of the components. However, in some cases, the drain lines can be flushed out with clean water.

Protect from Pressure

Finally, you should protect the elements of your sand filter septic system from mechanical pressure and subsequent damage. Often, the drain pipes of the treatment plant and even the holding tank are destroyed because of the weight put on from above. For example, if heavy trucks drive over the area with the system or you place massive piles of construction material, the stress will be transmitted to the concealed septic components. You should know the location of these units to prevent an unfortunate incident. If you notice sinking in that area, commission immediate repairs. 

About Me

Green And Clean: Septic Services And The Environment

Welcome. I'm Cedar and I have lived on a 400 hectare commune near the ocean my whole life. It was a fabulous way to grow up and I am happy to raise my children here. I'm a film-maker by profession, but my unofficial role here at the commune is to keep septic systems up to scratch. As someone who cares deeply about the environment, I know the importance of using the right systems and calling in expert services when necessary. Over the years, our commune has used both traditional and experimental systems. I've learnt that all systems need to be maintained, and I'm always on the lookout for better services. The topic of septic services usually doesn't creep into everyday conversation, but I'm sure there are others like me who need to have a working knowledge about this subject. I hope this blog gives you some ideas and assistance.

Latest Posts

30 November 2017
The sand filter systems are an ideal choice for your home if you have limited space on your property. In simple terms, this setup works like a standar

14 September 2016
If you've got a septic system, you'll naturally want to make sure it lasts as long as possible. There are plenty of ways to do this, and many of them

19 April 2016
Having a consistently soggy yard or soggy patches in your yard is never desirable for a homeowner; you can't mow over those soggy patches and they can